“Vitrified tile” covers several quite different products. They share a dense, low-porosity body fired at high temperature, which is why they are strong and absorb very little water. Where they differ is in how the visible surface is made — and that decides how they look, how they wear and where they should be used. Here are the four types you will meet most often in an Indian export price list.
Key takeaways
- GVT: a digitally printed glaze on a vitrified body — the widest choice of designs, ideal for homes and light commercial floors.
- PGVT: GVT with a polished glossy finish — mirror-like marble looks, but more care needed in wet or high-traffic areas.
- Double charge: two layers of pigmented material pressed together — a thick wearing layer for busy commercial floors.
- Full body: colour runs through the whole tile — chips and wear barely show, the choice for malls, transport hubs and heavy traffic.
- Always ask for test data and slip ratings for the exact product, not the category.
What makes a tile “vitrified”?
Vitrified tiles are made from a blend of clays, feldspar and silica pressed under high pressure and fired until the body partly fuses into a glass-like structure. The result is a tile with very low water absorption. Under the international classification used in ISO 13006 and EN 14411, the best-performing group (BIa) absorbs 0.5% or less — the range usually described as porcelain. That low porosity gives good strength and frost resistance, and it is the common ground for all four types below.
GVT — glazed vitrified tile
In a GVT, a layer of glaze is applied to the vitrified body and decorated with an inkjet digital printer before firing. Because the design is printed, almost anything is possible: marble, stone, cement, wood, terrazzo, fabric. Modern lines use several print heads and special inks to add texture and depth, and large designs can have many different faces so a floor does not look repetitive.
Strengths: huge design range, realistic natural looks, good value, available in matt, satin, carving and structured finishes.
Watch out for: the design lives in a thin surface layer. A deep chip on a dark GVT shows the lighter body underneath. Abrasion resistance depends on the glaze, so check the PEI class for floors.
Best for: residential floors and walls, hotels, offices, retail areas with moderate traffic.
PGVT — polished glazed vitrified tile
PGVT is a GVT whose glaze is thicker and then mechanically polished after firing to a high gloss. It is the product behind the glossy Statuario and Calacatta floors common in Gulf villas and lobbies. Some producers add a further protective treatment to the polished surface.
Strengths: deep, reflective, marble-like finish at a fraction of the cost of stone; large formats such as 800×1600 and slabs available.
Watch out for: a polished surface is more slippery when wet and shows scratches from grit more readily. It is usually unsuitable for wet areas, ramps and external use. Polishing can also reveal small pinholes, so inspect samples under a raking light.
Best for: living rooms, hotel lobbies, showrooms and other dry interiors where appearance comes first.
Double charge vitrified tile
In a double charge tile the press fills the mould with two layers of material: a pigmented top layer several millimetres thick and a standard body underneath. The two are pressed together and fired as one. The pattern is created by how the coloured powders are fed, so designs are simpler — speckles, salt-and-pepper, gentle veining — rather than photographic.
Strengths: the wearing layer is far thicker than a glaze, so it tolerates heavy foot traffic and re-polishing; very consistent and practical.
Watch out for: limited design realism compared with GVT; mostly 600×600 and 800×800 formats.
Best for: schools, hospitals, offices, shops, corridors and other busy commercial floors where durability matters more than a photographic look.
Full body vitrified tile
In a full body (sometimes called homogeneous or through-body) tile, the colour and pattern run through the entire thickness. Whatever is on the surface is also underneath it, so a chip or years of abrasion reveal the same colour rather than a contrasting body. Newer production methods can also give full body tiles veining that continues through the tile.
Strengths: the most forgiving under heavy wear; edges and cut pieces look consistent; available in matt and structured anti-slip finishes.
Watch out for: designs are generally plainer than GVT and the price is usually higher than standard GVT.
Best for: malls, airports, metro stations, industrial and parking areas, and outdoor-adjacent zones.
Side-by-side summary
| GVT | PGVT | Double charge | Full body | |
|---|---|---|---|---|
| Where the design is | Printed glaze | Printed, polished glaze | Thick pigmented top layer | Through the whole tile |
| Look | Any natural look | High-gloss marble | Speckles, simple veins | Plain, stone, concrete; some veined |
| Wear tolerance | Good (check PEI) | Moderate (scratches show) | High | Highest |
| Wet / outdoor use | With anti-slip finish | Generally no | With matt / textured finish | Yes, with anti-slip finish |
| Typical formats | 600×600 to 1200×2400 | 600×600 to 800×1600, slabs | 600×600, 800×800 | 600×600 to 800×1600 |
Questions to ask before you buy
Is it rectified?
Rectified tiles are ground to exact dimensions after firing, allowing narrow grout joints. Non-rectified tiles need wider joints. Large formats are almost always rectified.
What do the test reports say?
Ask for test results to EN 14411 or ISO 13006 for the specific product: water absorption, breaking strength and modulus of rupture, surface abrasion (PEI) for glazed tiles, deep abrasion for unglazed, and slip resistance. A category name on a price list is not a performance guarantee — two “PGVT” tiles from different factories can perform quite differently.
What is the slip rating?
For bathrooms, kitchens, pool surrounds and anything external, ask for a measured slip rating rather than a description such as “anti-skid”. Our guide to slip ratings R9–R13 explains what to look for.
How many faces does the design have?
For printed GVT and PGVT, more faces mean a more natural floor. Ask how many and look at a mock-up of several boxes together.
Choosing for a project
A simple rule of thumb: choose GVT for design-led residential work, PGVT for dry, prestige interiors, double charge for busy commercial floors on a budget, and full body where traffic is heavy and appearance must survive years of wear. Many projects combine them — PGVT in a lobby, full body in the service corridor, matt GVT in the bathrooms. If you are unsure, send us the room list and traffic levels and we will suggest a mix from our tile range.
