Import Guides

Large-format slabs 1200×2400 and 1600×3200: handling, installation and logistics

Large-format slabs 1200×2400 and 1600×3200: handling, installation and logistics

Large-format porcelain and sintered slabs — 1200×2400, 1600×3200 and similar — let designers cover a wall or a worktop with almost no joints. They also change everything that happens after the factory gate. A single 1200×2400 slab in 9 mm weighs about as much as an adult; a 1600×3200 slab in 12 mm weighs roughly twice that and is longer than most delivery vans. This guide covers what importers and contractors need to plan: formats and weights, packing, container loading, delivery and site access, and installation.

Key takeaways

  • A 1200×2400 slab in 9 mm weighs about 62 kg; in 15 mm about 100 kg. A 1600×3200 slab in 12 mm weighs in the region of 150 kg.
  • Slabs travel on edge in A-frames or crates, never flat; loading photos and bracing matter more than for tiles.
  • Containers stay weight-limited: roughly 1,267 m² of 9 mm 1200×2400, or about 750–900 m² of 12 mm sintered stone, per 20ft-equivalent load.
  • Plan the route from the container to the wall: forklift, lifting frames, lift and stair sizes, storage.
  • Install with a deformable adhesive (C2S1/S2 class), full contact, a flat substrate and a trained team.

Formats, thickness and weight

Format and thickness Area per piece Approximate weight per piece Typical use
1200×2400, 9 mm porcelain 2.88 m² About 62 kg Floors and walls, lobbies, feature walls
1200×2400, 15 mm porcelain 2.88 m² About 100 kg Heavy-duty floors, vanity and table tops
1600×3200, 12 mm sintered stone 5.12 m² About 150 kg (at roughly 29 kg/m²) Kitchen worktops, islands, full-height walls
1600×3200, 6 mm thin slab 5.12 m² Roughly half the 12 mm weight Wall cladding, furniture surfaces, overlay renovation

Weights are indicative; ask for the producer’s packing list for exact figures. Thin slabs of 3–6 mm are made on continuous-compaction or mouldless presses and, at the thinnest, carry a fibreglass mesh on the back.

Where each format comes from

Morbi produces 800×1600 and 1200×2400 porcelain slabs in volume, and Indian producers are competitive on standard designs. For 1600×3200 sintered stone, Chinese producers in Foshan lead clearly: they have the largest installed base of continuous-press lines and big-slab kilns, a fabrication ecosystem that cuts to size, and the widest range of through-body and book-matched designs. Origin also decides duty — see our sintered stone vs porcelain guide for how that plays out by market.

Packing: A-frames, crates and cages

Slabs travel on edge. Packed flat, they flex and crack under their own weight and under the movement of the ship. The usual systems are:

  • Wooden A-frames, with slabs leaning in pairs or sets, faces separated by foam or film and strapped tight;
  • Closed wooden crates for premium or book-matched sets, which protect faces and edges better;
  • Iron cage pallets, common for porcelain slabs from Indian producers.

Wood must be ISPM-15 heat-treated and stamped. For book-matched sets, ask for sequential numbering on each slab and on the crate, and for consistent shade and caliber across the set — otherwise the vein will not continue across the joint.

Container loading

Containers carrying slabs are limited by weight, like tile containers, at roughly 26–28 tonnes of payload. Indicatively, a load of 9 mm 1200×2400 is about 440 slabs or 1,267 m², and is usually placed in a 40ft because of the slab length. A 20ft holds roughly 750–900 m² of 12 mm sintered stone. Thicker slabs mean fewer m² per container, so freight per m² rises.

Most slab damage comes from movement: frames not tied to the container’s lashing points, voids not filled with airbags or timber, doors not braced. Ask for photos or video of every frame in position, the bracing and the seal. Our pre-shipment inspection guide explains what to check before the doors close.

At destination: devanning and delivery

Plan unloading before the vessel arrives. A forklift with long tines or a frame attachment is usually needed; heavy crates may need a crane or a container tilt. Inspect frames as the doors open, and if anything is damaged, photograph the intact seal and the damaged frames and notify the carrier and insurer within a few days. Insure on Institute Cargo Clauses (A); minimum CIF cover (ICC C) does not cover breakage.

For delivery to site, check the route: vehicle length for 3.2 m slabs, gate and corridor widths, lift car dimensions and stair turns. A slab that cannot reach the room cannot be installed. Store slabs on edge in A-frames, on level ground, protected from rain and site traffic.

Handling on site

  • Carry slabs vertically, never flat, using a rigid lifting frame with vacuum suction cups.
  • Use two or more trained installers for each slab; 1600×3200 slabs need a team and, often, a trolley system.
  • Cut with equipment made for slabs — rail cutters for straight cuts, wet saws or water-jet for openings — and cut on a fully supported, flat table.
  • Drill openings with the correct diamond bits and keep corners of cut-outs radiused to reduce stress cracks.

Installation essentials

  1. Substrate: flat, sound and dry. Large formats show every deviation as lippage.
  2. Adhesive: a deformable cementitious adhesive of class C2S1 or S2, chosen for the substrate and use; follow the adhesive maker’s data sheet.
  3. Coverage: back-butter the slab and comb the substrate so the slab has full contact, without voids.
  4. Levelling: use a levelling clip system to control lippage while the adhesive cures.
  5. Movement joints: respect perimeter and field movement joints as the design specifies.
  6. Worktops: sintered and porcelain worktops are fabricated like stone — follow the producer’s fabrication guide on supports, overhangs and cut-outs.

Which markets buy which slabs

In the Gulf, slabs are popular for villas, hotels and retail; producer-specific anti-dumping duties apply, so the factory matters. See the UAE, Qatar and Kuwait pages. In Israel, slabs suit residential towers and kitchens, with the SII standards route confirmed per product. When you request a quote, tell us the final site and access, not just the port — it changes how we pack.