Shade Variation V1–V4, Calibre and Ordering the Same Lot

Shade Variation V1–V4, Calibre and Ordering the Same Lot

Two boxes of the same design can look slightly different on the floor. That is normal for fired ceramic and porcelain: colour and size shift a little from one production run to the next. What matters for an importer is that the variation is declared, sorted and labelled — so that every room is laid from one shade and one size. This page explains shade ratings (V1–V4), calibre and how to order and reorder the same lot.

Key takeaways

  • A V-rating (V0–V4, from the American standard ANSI A137.1) describes how much tiles of one design are meant to differ from each other. It is a manufacturer’s declaration, not an ISO test result.
  • Shade and calibre are two different things: shade is colour and tone, calibre is the sorted size group of a production run.
  • Every carton carries a shade (tone) code, a calibre code and a batch or lot number. Lay one area only from cartons with the same codes.
  • Order each project in one go, add spare tiles for cuts and future repairs, and blend tiles from several cartons while laying.
  • We publish a product’s shade rating only from a test report or manufacturer declaration we hold; otherwise it is shown as “on request”.

Shade ratings V0 to V4

The shade variation scale most often quoted on tile data sheets comes from ANSI A137.1, the American specification for ceramic tile. Its “aesthetic classes” let a manufacturer tell buyers how much tiles of the same design and the same production run are designed to vary. The 2022 edition added V0; most catalogues still use V1 to V4.

ClassMeaningWhat you see on the floorTypical designs
V0Very uniformPieces are practically identical.Plain colours made to a measured colour tolerance.
V1Uniform appearanceDifferences between pieces of the same run are minimal.Solid colours, many cement looks.
V2Slight variationClearly distinguishable differences in texture or pattern within similar colours.Soft marble and stone looks.
V3Moderate variationColours on one piece may differ markedly from the next piece.Veined marble, wood looks, rustic finishes.
V4Substantial variationRandom colour and texture differences from tile to tile; one tile may look unlike the next.Slate, travertine and “natural” looks.

Two points are often misunderstood. First, a V-rating is about variation between tiles of one run. It does not promise that a run made next year will match this one. Second, it is a declared characteristic — there is no ISO pass mark for “V2”. The ISO test that comes closest, ISO 10545-16, measures small colour differences between plain tiles and is used mainly for uniform colours.

Digitally printed porcelain adds a third idea: the number of faces. A marble-look design printed with eight different graphics will repeat less often across a floor. Faces describe the design, not shade variation; our product pages show both separately.

Calibre: why sizes are sorted

Tiles shrink as they are fired, and not every run shrinks by exactly the same amount. Factories therefore measure the tiles and sort them into size groups called calibres (or sizes / caliber codes). For a porcelain tile in the low-absorption group (ISO 13006 / EN 14411 group BIa), the average size of each tile may differ from the declared work size by up to about ±0.6% — on a 600×1200 tile that can be several millimetres. Calibre sorting keeps the tiles in one carton much closer than that.

Rectified tiles are ground to size after firing, so the differences between runs are much smaller and some factories do not need a separate calibre code for them. Non-rectified tiles always need it. Mixing calibres on one floor shows up as uneven grout joints and lines that drift.

Reading a carton

An export carton usually shows the design name and product code, the format and thickness, the quality grade, and three codes that decide what can be laid together:

  • Shade or tone code — the colour lot. Cartons with different shade codes should not be mixed in one area.
  • Calibre code — the sorted size group.
  • Batch or lot number — the production run, used for any claim and for reordering.

Cartons that carry a Vitrano box label also have a QR code. Scanning it at vitrano.in/v/ shows the batch, shade and calibre recorded for that carton — and, for a genuine label, a “Reorder this shade” button that sends us those codes with your request.

How to order — and reorder — the same lot

  1. Approve a sample from the production lot, not from the showroom. Showroom samples come from an earlier run. For a large order, ask for a photo or a cut piece of the actual lot before loading; our pre-shipment inspection guide explains how inspectors compare shade from several cartons.
  2. Order each project or each area in one go. A container loaded from one run is the simplest way to get one shade and one calibre for a whole floor. Where a quantity has to come from more than one run, we say so on the quotation; ask for each run to be kept on separate, labelled pallets.
  3. Add spare tiles. Manufacturers commonly suggest about 10% extra for cuts and breakage, and many buyers keep a few cartons of each lot for future repairs. No standard sets the figure; it depends on format, layout and the number of cuts.
  4. Keep the codes. Note the shade, calibre and batch from the cartons (or scan the QR label). To reorder, send us those codes: we ask the producing plant whether stock of that run remains. If it does not, a new run will be close but not identical — plan to use it in a separate room or area.
  5. Blend while laying. Open several cartons at once and mix tiles from them, especially for V3 and V4 designs, so that no patch of the floor comes from a single carton.
  6. Check before fixing. Lay out tiles dry under good light and check codes against the delivery note. Report any mismatch before installation; installed tiles are usually treated as accepted.

What to ask your supplier

  • The declared shade variation class (V0–V4) for each design, and who declared it.
  • Whether the tiles are rectified, and the calibre range of the lot you will receive.
  • Confirmation that one order comes from one production run — or a list of runs per pallet if not.
  • Photos of cartons from the lot showing shade, calibre and batch codes before loading.
  • The number of different faces for printed designs.

On our product pages the shade rating shows “Test report on request” until we hold a document for that product; once we do, the value and the document holder are shown. For the test methods behind dimensions, water absorption, strength and slip resistance, see Technical standards explained. Ready to see a lot in person? Request samples.

Sources (checked October 2026)