Export Tips

20ft vs 40ft: how many m² of tiles fit in a container?

20ft vs 40ft: how many m² of tiles fit in a container?

Ask a first-time tile importer how much a 40ft container holds and the instinctive answer is “twice a 20ft”. For furniture or textiles that is roughly right. For ceramic and porcelain tiles it is not, and misunderstanding why can cost a lot of money in freight.

Tiles are dense. A single box of 600×1200 mm porcelain weighs around 27–30 kg, and a pallet of it about a tonne. Long before the walls of a container are full, the container hits its weight limit. That is the whole story of tile logistics in one sentence: tiles are weight-limited, not volume-limited.

Key takeaways

  • A 20ft container of tiles is typically loaded to about 26–27 tonnes of cargo — roughly 1,100–1,400 m² of standard 8–10 mm tiles.
  • A 40ft carries about the same weight, so it rarely carries more tile; it usually just costs more.
  • Thicker tiles mean fewer square metres: 20 mm outdoor pavers fill a 20ft at around 650 m².
  • 40ft containers make sense for long slabs, light wall tiles or lanes where 40ft freight is close to 20ft.
  • All figures here are indicative; your supplier’s packing list is the final word.

Why weight decides

A standard 20ft dry container has a maximum gross weight of around 30 tonnes including the container itself, and shipping lines and road regulations at both ends often impose lower practical limits. In practice exporters load tiles to roughly 26–28 tonnes of cargo in a 20ft. A 40ft container has a similar maximum payload — only slightly higher — because it is limited by the same lifting equipment, chassis and road-axle rules.

So when you load tiles, a 20ft is nearly full by weight while still half empty by volume. Put the same tonnage in a 40ft and you simply have more empty space at a higher freight rate.

Indicative loading by size (20ft)

The table below uses typical Morbi export packing. Your exact figures depend on thickness, body weight, box design and pallet pattern, so treat these as planning numbers, not guarantees.

Size and thickness Pcs / box m² / box kg / box (approx.) Boxes / 20ft m² / 20ft (indicative)
300×600 ceramic wall, 8–9 mm 5 0.90 13–14 ~1,900–2,000 ~1,700–1,800
600×600 vitrified / double charge, 8–9.5 mm 4 1.44 25–28 ~960 ~1,380
600×1200 GVT / PGVT, 8–9 mm 2 1.44 26–28 ~760–900 ~1,100–1,300
600×1200 GVT, 10–12 mm 2 1.44 32–36 ~560–720 ~800–1,000
800×800, 10 mm 3 1.92 ~38 ~720 ~1,380
800×1600 slab, 9 mm 2 2.56 ~53 ~520 ~1,330
600×600 porcelain paver, 20 mm 2 0.72 ~31 ~890 ~640
1200×2400 slab, 9 mm (on frames) 1 2.88 ~62 ~440 ~1,270

Two patterns stand out. First, for standard 8–10 mm floor tiles, a 20ft holds roughly 1,100–1,400 m² almost regardless of size, because the weight per square metre is similar. Second, thickness is what really changes the answer: a 20 mm paver weighs more than twice as much per square metre as a 9 mm tile, so you get roughly half the area.

What about a 40ft?

If you load 600×1200 tiles into a 40ft until it is full by volume you would have something like 50 tonnes of cargo, which is far beyond what any shipping line or road will accept. So a 40ft of tiles is loaded to about the same 26–28 tonnes as a 20ft, carrying about the same square metres. You pay the 40ft freight rate, which on most lanes is higher, for very little extra product.

When a 40ft does make sense

  • Long slabs. 1200×2400 and longer slabs travel on A-frames or crates. Their length and the frames themselves can make a 40ft the practical choice even though the weight is similar.
  • Light products. Thin ceramic wall tiles, mosaics on mesh or mixed loads with sanitaryware can fill a 20ft by volume before weight, and then a 40ft can carry more.
  • Freight anomalies. On some lanes and at some times carriers price a 40ft close to a 20ft. If the rates are nearly equal and the extra space is useful for lighter items, the 40ft can win.
  • Buyer preference. Some warehouses and distributors prefer fewer, larger containers for handling reasons, accepting the trade-off.

How pallets fit in

Export pallets for 600×1200 tiles are typically about 1,250×650 mm and carry around 840–1,150 kg each. A 20ft usually takes about 20–26 pallets in a single layer or carefully stacked, depending on height and weight distribution. Pallets must be loaded tightly, with weight spread evenly front to back so the road axle limits are respected, and gaps filled with airbags or dunnage so nothing can shift at sea. ISPM-15 heat-treated, stamped wooden pallets are required by most destinations.

Mixing designs in one container

A single 20ft does not have to be one design. Most exporters allow several designs and sizes in one container at pallet-level minimums, which is how smaller importers build a range. Just remember the weight rule still applies to the total: mixing heavy 20 mm pavers with standard tiles reduces the total area you can load.

Turning loading into a landed cost

Because freight is charged per container, the number of square metres in the container directly changes the freight cost per square metre. If a lane costs, say, USD 1,200 for a 20ft and you load 1,200 m², freight adds about USD 1 per m². Load 640 m² of 20 mm pavers and the same freight adds nearly USD 2 per m². That is why, when comparing quotes, you should always ask for the loading figure as well as the price.

Our container calculator lets you try different sizes and quantities, and the supplier’s packing list for your actual order will give the final numbers. For the terms that sit around the container — MOQ, packing and breakage — see the export terms & FAQ.